Cam Type Bearings Supplier
There are two major cam-type bearings in use; stud type and yoke type. In both types, a stem or shaft extends from the inner race. The stem can be either hollow to press onto a stub shaft (yoke type) or incorporate threads to be screwed into a corresponding threaded hole (stud type). Stud type cam bearings are typically a standard size but there are heavier studs available that can handle bigger static loads. Yoke types can support the same sized static loads as heavy studs but are best suited for applications that require minimal deflection.
Cam-type bearings are particularly useful in applications where the load can be supported by the head as a guide roller or when a specific pattern of travel is required. Sufficient hardness is required in the components to reduce the wear due to rolling and sliding friction. To achieve sufficient hardness, the outer race is made thicker than on standard ball or roller bearings to avoid deformation of the bearing. The inner race is induction hardened with the application of the end plates which also help contain the roller or needle bearings.
Cam-type bearings are available in different shapes and configurations to suit a wide range of applications. If you need cam-type bearing parts for your equipment, contact your Mechanical Power specialist to discuss your specific application and determine what type of cam-type bearing is right for you. Once we determine the type of cam follower you need, we will obtain high quality cam-type bearing parts through our partnerships with top manufacturers, saving you time and money in the process. Contact Mechanical Power to see why we have become one of the most trusted cam-type bearing suppliers.